Copying 202 Lighten/DarkenYou can adjust the copy density level to make the copy lighter or darker than the original.1 For the DocuPrint M205 f/M205 fw, load the document(s) face up with top edge in first into theADF or place a single document face down on the document glass, and close the documentcover.For the DocuPrint M205 b, place a single document face down on the document glass, and closethe document cover.See also:• "Making Copies From the ADF (DocuPrint M205 f/M205 fw Only)" on page 194• "Making Copies From the Document Glass" on page 1922 Press the (Copy) button.3 Select Lighten/Darken, and then press the button.4 Select the desired setting, and then press the button.NOTE:• Value marked by an asterisk (*) is the factory default menu settings.5 If necessary, customize the copy settings including the number of copies, copy size, and imagequality.See also:• "Setting Copy Options" on page 1956 Press the (Start) button to begin copying.Lighter2 Makes the copy lighter than the original. Works well with dark print.Lighter1Normal* Works well with standard type or printed documents.Darker1 Makes the copy darker than the original. Works well with light print orfaint pencil markings.Darker2
