81 Printer Connection and Software Installation Printing and Checking the System Settings PagePrint the System Settings page and check your printer's IP address.This section includes:• "The Operator Panel" on page 81• "The Printer Setting Utility" on page 81The Operator PanelNOTE:• The reports and lists are all printed in English.1 Press the (System) button.2 Select Report / List, and then press the button.3 Select System Settings, and then press the button.The System Settings page is printed.4 Confirm the IP address next to IP Address under Wired Network/Wireless Network on theSystem Settings page. If the IP address is 0.0.0.0, wait for a few minutes to resolve the IPaddress automatically, and then print the System Settings page again.If the IP address is not resolved automatically, see "Assigning an IP Address (for IPv4 Mode)" onpage 77.The Printer Setting UtilityThe following procedure uses Windows XP as an example.NOTE:• The reports and lists are all printed in English.1 Click start → All Programs → Fuji Xerox → Fuji Xerox Printer Software for Asia-Pacific →your printer → Printer Setting Utility.NOTE:• The window to select a printer appears in this step, when multiple print drivers are installed on yourcomputer. In this case, click the name of the desired printer listed in Printer Name.The Printer Setting Utility appears.2 Click the Printer Settings Report tab.3 Select Reports from the list at the left side of the page.The Reports page is displayed.4 Click the System Settings button.The System Settings page is printed.If the IP address is 0.0.0.0 (the factory default) or 169.254.xx.xx, an IP address has not beenassigned.See also:• "Assigning an IP Address (for IPv4 Mode)" on page 77
