SMart eSolutionsPhaser 4622System Administrator Guide102SMart eSolutionsDevice Communication Status1. At your Workstation, open the web browser and enter the IP Address of the machine in theAddress Bar.2. Press Enter.3. Click the Status icon.4. Click on SMart eSolutions.5. The Device Communication Status section indicates if your machine is successfullycommunicating with Xerox. One of the following messages will display:• Communication Failure• Customer Not Enrolled• Fully Configured & Communicating with Xerox6. If there is an error in communication, the section displays ‘Communication Failure’, click on theSettings button. The SMart eSolutions Setup page displays.SMart eSolutions Setup - Enrollment1. In the Enrollment area:a. For SMart eSolutions Enrollment, there are two options:• Enrolled — Communication with Xerox is enabled. This is the default state for theprinter.• Not Enrolled — Communication with Xerox is disabled. Select this option to stopcommunications with Xerox. When you select Not Enrolled a window appears to confirmthat you want to deactivate SMart eSolutions enrollment.b. Select Enrolled and click on OK when the acknowledgement message displays.c. The Machine Serial Number displays the serial number of the printer.SMart eSolutions Setup - Communication Setup1. In the Communications Setup area:a. For Daily Transaction Time specify the start time (hour and minute) when SMart eSolutionscommunication occurs with Xerox.b. HTTP Proxy Server displays one of the following:• Fully Configured• Not Configuredc. If ‘Not Configured’ is displayed or you want to edit the current configuration, click onConfigure and refer to Proxy Server on page 103.
