SecurityPhaser 4622System Administrator Guide78Administrator and Key User AccountsOverviewAdministrator and Key User accounts can be configured on the machine to allow access to specificservices or areas.Authentication and AccountingAuthentication works independently of any accounting access that is enabled on the machine.Information Checklist5. Ensure that the Xerox machine is fully functional on the network.6. TCP/IP and HTTP protocols must be configured so that Internet Services can be accessed.Configure the Administrator Account1. At your Workstation, open the web browser, enter the TCP/IP Address of the machine in theAddress bar.2. Press Enter.3. Click on the Properties tab.4. Click on the Security link.5. Click on the Security Settings link.6. Administrator access to CentreWare Services can be restricted to particular workstations byentering the IP addresses of the authorized workstations into the Host Access List field.Note Multiple IP address entries should be separated by a comma.7. The default Administrator login name is Admin and the default password is 1111. TheAdministrator login name and password can be changed by entering new values in theappropriate fields.Note It is not recommended to change the default Administrator login name.Note The password cannot be left blank.8. Click Apply to save Login Name and password changes.Configure the Key User Account1. At your Workstation, open the web browser, enter the TCP/IP Address of the machine in theAddress bar.2. Press Enter.3. Click on the Properties tab.4. Click on the Security link.5. Click on the Security Settings link.
