Network InstallationPhaser 4622System Administrator Guide35Dynamic AddressingProcedureIMPORTANT Follow the steps on page 16, then return to this page.Click on BOOTP in step 9.Create the Print Queue24. Follow the steps above in Create the Print Queue on page 34.Linux LPRngStatic AddressingInformation ChecklistBefore starting the Installation procedure, please ensure that the following items are available and/orthe tasks have been performed:1. Linux operating system that supports PrintTool.Note Not all distributions of Linux support PrintTool.Procedure1. See Chapter 3, Configure Static Addressing using the Machine, Information Checklist on page 15.Create the Print Queue1. Open the LPRngTool from the Linux Client.2. Click on the Add.3. In the Names area, enter a name for your print queue.4. The spool directory is the directory where print jobs are stored and is a subdirectory of/var/spool/lpd. Add the name of the print queue to the end of the subdirectory path.5. In the Hostname/IP of Printer area, enter the hostname or IP Address of the Xerox machine.6. Click on OK.7. Click on Exit to close the program.8. To allow access to the printer, edit the /etc/hosts table to list the client system.9. Edit and create the /etc/hosts.lpd file to list the client system.Dynamic AddressingProcedureIMPORTANT Follow the steps on page 16, then return to this page.Click on BOOTP in step 9.10. Follow the steps above in Create the Print Queue.
