Xerox Phaser 6250 Service Manual

Also see for PHASER 6250: Guidelines Supplementary guide Manual Service manual Maintenance instructions

Contents

Xerox Phaser 6250 Service Manual Manual pdf 199 page image

Print-Quality Troubleshooting 5-11Light Print in Only One ColorOnly one color; yellow, magenta, cyan, or black, is too light on the printed image. Thetest print is 25% coverage.Initial Actions■ Verify that color calibration has beenperformed prior to using thistroubleshooting procedure.Troubleshooting ProcedureStep Check Yes No1 Is the affected color(s) toner supplyempty? (Check the top of the augertube for the affected color.)Replace TonerCartridge, PL 10.1Go to stop 2.2 Check the Imaging Unit for correctinstallation, damage orcontamination.Verify the shipping seals arecompletely removed.Replace theImaging Unit . PL9.1.3.Go to Step 3.3 Inspect the Developer Bias PlungerStud of the affected color for properspring pressure, compare to theother colors.Check for contamination.Go to Step 4. Replace the HousingAssembly Biaspage 8-69.4 Check for foreign objects orcontamination present in the laserbeam path between the Laser Unitand the Imaging Unit.Remove object and/or contamination.Go to Step 5.S6200-272