Phaser 6280 Color Laser Printer Service Manual 3-11Error Messages and CodesJam Error ProceduresJam at Tray 2 (Feeder 1 Jam)Paper fed from Tray 2 did not reach the Registration Sensor on time.Applicable Chain Link■ Chain Link 071-100: Jam at Tray 2Initial Actions■ Try picking paper from a different tray.■ Check the paper path for obstructions or debris.■ Cycle printer power.■ If the problem persists, follow the procedure below.Troubleshooting Reference TableApplicable Parts Wiring and Plug/Jack Map References■ Feed Clutch Assy., PL3.2.24■ Registration Sensor, PL3.2.30■ Registration Sensor Harness,PL3.2.37■ PH Drive Assy., PL8.1.7■ MCU Board, PL9.1.20■ Right Side Harness, PL10.1.15■ “Map 2 - Laser Unit, Feeder Assembly”on page 10-10■ “Map 4 - LVPS and MCU Boards” onpage 10-12■ “Tray 1 (MPT) and Registration” onpage 10-23■ “Feeder” on page 10-27Troubleshooting Procedure TableStep Actions and Questions Yes No1 1. Check the paper condition.2. Is the paper damaged?Replace thepaper.Go to step 2.2 1. Check the paper setting.2. Does the paper in use match withthe paper settings on the printer’sControl Panel?Go to step 3. Correct thepaper settingsusing theprinter’s ControlPanel.Go to step 3.3 Does the error still occur? Go to step 4. Complete.4 1. Reseat the paper tray.2. Does the error still occur?Go to step 5. Complete.
