Phaser 6280 Color Laser Printer Service Manual 3-97Error Messages and CodesOut of MemoryThe printer memory is full and cannot continue to print. Print job requiresadditional memory.Applicable Chain Link■ Chain Link 016-718: Memory OverflowInitial Actions■ Cycle printer power.■ If the problem persists, follow the procedure below.Troubleshooting Reference TableApplicable Parts Wiring and Plug/Jack Map References■ Image Processor Board, PL9.1.27■ Memory Card (Option), PL9.1.30Troubleshooting Procedure TableStep Actions and Questions Yes No1 1. Check the required memory for theprint job.2. Print a small size file (example as aWindows test print).3. Does the error still occur?Go to step 2. Add memorycard or separatethe print job.2 1. Reseat the memory card(page 8-91).2. Does the error still occur?Go to step 3. Complete.3 1. Check the memory card capacity.Print the printer Configuration Page:Menu > Information Pgs >Configuration.2. Does the memory meet the print jobrequirements?Go to step 4. Replace theImageProcessorBoard(page 8-87).4 1. Replace the memory card(page 8-91).2. Does the error still occur?Replace theImageProcessor Board(page 8-87).Complete.
