Security SettingsXerox WorkCentre 3315DN/3325DN/3325DNISystem Administrator Guide118Security SettingsTo prevent unauthorized changes to printer settings, ensure a login ID and password is entered in theSystem Administrator area.Administrator Accounts1. At your workstation, open the web browser and enter the IP Address of the machine in theAddress Bar.2. Press Enter.3. Select Properties.4. If prompted, enter the Administrator User Name (admin) and Password (1111), and select Login.Click Properties.5. In the Security link on the left hand side select the System Security link.6. Select System Administrator.7. If required, enter Administrator details for:• Name• Phone Number• Location• E-mail Address8. The WebUI Access Control checkbox controls access to the Internet Services screen.9. To change the Administrator Password, select the Change Password box and enter the requiredLogin ID and password. The default is admin and 1111 respectively.10. Select the Advanced button for Advanced Access Control.11. Select the required options in the Password Expires in drop down menu.12. Select Protect Login IPv4 Address if required, and enter the required login IP address that youwant to protect in the IPv4 Address box.13. Select the required option for Login Failure Policy. The options are: Off, 3 times and 5 times.14. Select the required number of minutes from the Auto Logout menu.15. Select Security Settings Reset to enable this option if required.16. Select Save.17. To control access to the machine control panel, select the Enable box to enable LUI AccessControl.18. Select Apply to save the changes.19. Select OK when the acknowledgement message displays.
