PropertiesXerox WorkCentre 3315DN/3325DN/3325DNISystem Administrator Guide150Configure Earth Smart Settings1. In the Machine Settings link select the System link.2. Select Earth Smart.3. Select Settings. The Default Mode page displays.4. Select the required option:• Select On to enable Earth Smart,• Select On-forced to enter a 4 - 8 digit password.5. In the Features Configuration area:a. Select Factory Default if you want to retain the default Earth Smart settings.b. To change the Earth Smart settings, select Custom Settings.• Select Edit and Preview Simulator.• Select the required Copy Settings for 2-Sided, N-Up and Toner Save. The simulatorshows estimates for the CO2, Energy and Paper savings.• Select the required Folder Print Settings for 2-Sided and Toner Save.• Select the required PC Driver Print Settings for 2-Sided, N-Up, Skip the Blank Pages,and Toner Save.c. Click OK to save your changes.View the Earth Smart ReportThe Earth Smart Report shows you the Total CO2 Emission, Total Saved Energy and Total Saved Paperof an Earth Smart job in a specific period, compared with a normal job.1. In the Earth Smart menu select Report.2. Select the time frame for your report from the Period menu. The information will display in theEarth Smart Information Report area.Input TrayTo access the Input Tray settings1. In the Machine Settings link select the System link.2. Select the Input Tray link. The Input Tray page displays.3. In the Paper Size area, from the following drop-down menus select the required paper sizesettings:• Tray 1• Tray 2Note Tray 2 is only available with the Optional Tray installed.• Bypass Tray4. In the Paper Type area, from the following drop-down menus select the required paper typesettings:• Tray 1• Tray 2
