CloningXerox WorkCentre 3315DN/3325DN/3325DNISystem Administrator Guide41CloningCloning enables you to conveniently copy the settings of one machine and transfer them to othermachines with the same system software version. Groups of settings can be chosen for cloning, ratherthan doing a full clone, allowing some flexibility to the administrator. Cloning is intended as an easyway to install or manage a fleet of devices.Procedure1. Verify the Software Version for all machines involved in cloning.2. Clone a Machine by selecting and saving the features or settings.A Configuration Cloning File is created and saved with the extension .dlm (downloadable module).3. Install the Clone File onto another Machine using CentreWare Internet Services.The features and settings are transferred and applied to the recipient machine.Note: All machines involved in the Cloning procedure must contain the same system softwareversion.Verify the Software Version1. At your Workstation, open the web browser, enter the IP Address of the machine in the Addressbar.2. Press Enter.3. Click on the Properties tab.4. Click on Machine Settings.5. Click on Configuration.6. Scroll down and view the Printer Setup area.7. View the System Software Version. Verify that all machines involved in the cloning procedure showthe same system software version.Note: Do not close the web browser.Clone a Machine1. Within the Machine Settings area of CentreWare Internet Services, click on Cloning.2. You have one of the following cloning options:a. All features - DO NOT deselect any checkboxes.b. Specific features - deselect the checkboxes next to the feature(s) that you DO NOT want toclone.3. Click on Clone.If prompted, enter the Administrator User ID admin and Password 1111 and click on Login.4. A Cloning.dlm link will appear. Right-click on the link and click on Save Target As.
