UnixXerox WorkCentre 3315DN/3325DN/3325DNISystem Administrator Guide33UnixHP-UX Client (Version 10.x)HP-UX workstations require specific installation steps to communicate with the machine. The machineis a BSD-style UNIX printer, whereas HP-UX is a System V-style UNIX.IMPORTANT: All UNIX commands are case sensitive, so enter the commands exactly as they arewritten.Information ChecklistBefore starting please ensure that the following items are available and/or the tasks have beenperformed:• Existing operational network utilizing the TCP/IP protocol.• Ensure that the machine is connected to the network.• Static IP Address for the machine.• Subnet Mask Address for the machine.• Gateway Address for the machine.• Host Name for the machine.Procedure1. Follow the steps in Configure Static IPv4 Addressing using the Machine User Interface on page 28,then return to this page.Configure the Client1. Add the machine Host Name to the etc/hosts file on the HP-UX workstation.2. Ensure that you can ping the machine from the HP-UX workstation.3. Use either the GUI method or the tty methods as detailed below:GUI Method1. Open a Command window from the desktop.2. Enter su to access Super User mode.3. Enter sam to start the System Administrator Manager (SAM).4. Select the Printers and Plotters icon.5. Select lp spooler.6. Select Printers and Plotters.7. Select Actions: Add Remote Printer/Plotter....8. Enter the following information into the Add Remote Printer/Plotter form:a. Printer Name: printer name.Where printer name is the name of the queue being created.
