Windows using Microsoft (R) NetworkingWorkCentre™ 5735/5740/5745/5755/5765/5775/5790System Administrator Guide8210. Click on [OK] to close the Properties box.11. Right-click on the printer icon in the Printers folder and select [Printing Preferences].12. Ensure the Paper/Output tab is selected and click the [More Status] button at the bottom of thewindow. Current information about the printer is available. Click on [Close] to close the window.13. For Default Settings, select any required default settings in the Print Driver and click on [OK].Verify the Test Page printed at the machine.Configure the Print Driver - ManuallyTo configure the Print Driver without using bi-directional communication return to the Configurationtab within the Properties of the Print Driver.1. Click on [Installable Options].2. Select the options that are installed on the device.3. Click on [OK].4. Click on the [General] tab.5. Click on [Print Test Page].6. Click on [OK] to close the Properties box.7. Right-click on the printer icon within the Printers folder and select [Printing Preferences].8. For Default Settings, select any required default settings in the Print Driver.Verify the Test Page printed at the machine.Configuration CloningIf you are installing multiple machines on your network you may find the Cloning feature useful. Thisfeature allows you to copy configuration settings from one machine to another. For further informationenter the word cloning in the search tool.NetBEUI over IPBefore starting the procedure, ensure the following items are available or tasks have been performed:• An existing operational network utilizing the TCP/IP protocol.• Ensure device is connected to the network with an Ethernet Cable.At the MachineNote: To configure this feature or these settings access the Tools pathway as a SystemAdministrator. For details, refer to Access Tools Pathway as a System Administrator on page 18.1. From the Tools pathway, touch [Network Settings].2. Touch the [Network Setup].3. Touch [Microsoft Networks]. In the Microsoft (R) Networks screen:a. Touch [Microsoft Enablement].b. Touch [Enable] to enable the Microsoft Network protocols.
