CopyingWorkCentre 7120 Multifunction PrinterUser Guide107Shifting the ImageYou can change the placement of the image on the copy page. This is useful if the image size is smallerthan the page size.Originals must be positioned correctly for image shift to work correctly. For details, see Basic Copyingon page 96.• Document feeder: position originals faceup, left (long) edge entering the feeder first.• Document glass: position originals facedown, in the back-left corner of the document glass, longedge to the left.To change image placement:1. Touch Copy on the touch screen, then touch the Layout Adjustment tab.2. Touch Image Shift.3. To center the image on the page, touch Auto Center.4. To specify the position of the image:a. Touch Margin Shift.b. To specify the amount of Up/Down and Left/Right shift for Side 1, touch the plus or minus(+/–) buttons.c. If you selected 2-sided copies: to specify the amount to erase from each edge on Side 2,touch the plus or minus (+/–) buttons, or touch Mirror Side 1.5. To specify the original’s orientation as you place it in the document feeder or on the documentglass, touch Original Orientation, then touch either Upright Image or Sideways Image (top toleft), then touch Save.Note: If preset values were previously saved, select the preset in the lower-left corner of the window.6. Touch Save.Rotating the ImageIf the orientation of the paper currently loaded in the selected tray differs from that of your original,the printer automatically rotates the copy to fit on the paper.1. Touch Copy on the touch screen, then touch the Layout Adjustment tab.2. Touch Image Rotation, then select from the following:• To cancel rotation, touch Off.• For automatic rotation of the copy of your original to fit correctly on your selected paper,touch Always On.• For automatic rotation of the copy of your original when Auto Paper Select or Auto % isselected, touch On during Auto.3. Touch Save.
