Installation and SetupWorkCentre 7120 Multifunction PrinterUser Guide438. Select the desired printer driver:• PostScript• PCL 5• PCL 69. If scanning is installed, click the desired scan driver:• TWAIN• WIA10. If scanning is installed, select Xerox Scan Utility.11. Click Install.12. When the installation completes, click Finish.Installing the Drivers and Utilities for MacintoshTo access all features of the printer, you must:• Install the printer and scan drivers• If required, add the printerBefore installing drivers, verify that the printer is plugged in, turned on, connected to an active networkand has a valid IP address.Installing Printer and Scan DriversNote: The printer and scan drivers both install at the same time.To install the printer and scan driver:1. Insert the Software and Documentation disc into your computer’s CD or DVD drive.Note: If the Software and Documentation disc is not available, download the latest driver fromwww.xerox.com/office/WC7120drivers.2. Open the Mac folder, then open Mac OS 10.3+Universal PS folder.3. Open WorkCentre 7120.dmg.4. Open WorkCentre 7120 CD.5. Click Continue three times.6. Click Agree to accept the License Agreement.7. Click Install.8. Type your password, then click OK.9. If the printer does not appear in the list of discovered printers:a. Click Manually enter the printer’s name or address at the top of the window.b. Type the address or name of the desired printer, then wait for the computer to find theprinter. If the IP address of the printer is not known, see Finding The Printer’s IP Address onpage 47.c. Click Continue.10. Click OK to accept the print queue message.11. If desired, select the check boxes to Set Printer as Default and Print a Test Page.
