Faxing144 WorkCentre 7500 Series Multifunction PrinterUser Guide3. Touch Save.Specifying the Orientation of the OriginalTo specify the orientation of the original document:1. Touch the Layout Adjustment tab, then touch Original Orientation.2. On the Original Orientation screen, touch the desired orientation:• Upright Images and Sideways Images refer to the direction the originals are loaded in thedocument feeder.• Portrait Originals and Landscape Originals refer to the images on the originals.Note: If you are using the document glass, the orientation of the original is as seen before turning itover.3. Touch Save.Specifying the Size of the OriginalTo scan the correct area of the original, specify the original size:1. Touch the Layout Adjustment tab, then touch Original Size.2. On the Original Size screen, select one of the following:• Auto Detect allows the printer to determine the size of the original.• Preset Scan Areas specifies the area to scan when it matches a standard paper size. In thescrolling list, touch the desired paper size.• Custom Scan Area allows you to specify the height and width of the area to scan. Touch theHeight-Y and Width-X arrows to specify the area.• Mixed Size Originals allows you to scan standard-size originals of varying sizes. Use thediagram on the screen to determine which original sizes can be mixed in the same job.3. Touch Save.Sending a Delayed FaxYou can set a time in the future for the printer to send your fax job. The time delay can be from 15minutes to 24 hours from the current time.Note: The printer must be set to the current time before you can use this feature.To specify the time to send your fax:1. Touch the Fax Options tab, then touch Delay Send.2. Touch Specified Time and set the time:a. Touch the Hour field and use the keypad or touch the arrows to set a number.b. Touch the Minute field and use the keypad or touch the arrows to set a number.c. If your printer is set to display the 12-hour clock, touch AM or PM.3. Touch Save. The fax is sent at the specified time.
