Copying94 WorkCentre 7500 Series Multifunction PrinterUser GuideAdvanced CopyingThis section includes:• Building a Copy Job......................................................................................................................................................... 94• Printing a Sample Copy ................................................................................................................................................. 94• Saving Copy Settings ...................................................................................................................................................... 95• Retrieving Saved Copy Settings.................................................................................................................................. 95Building a Copy JobUse this feature to produce complex copy jobs that include a variety of originals requiring different copysettings. Each segment of the job can have different copy settings. Once all the segments areprogrammed, scanned, and temporarily stored in the printer, the copy job prints.To build a copy job with multiple segments:1. Press the Services Home button, then touch Copy.2. Program and scan the first segment:a. Load the originals for the first segment.b. Select the required settings, such as layout adjustments, image quality, and so on.c. Touch the Job Assembly tab, then touch Build Job > On.d. Select or clear the Display this window between segments check box.e. Press the green Start button on the control panel.3. Program and scan additional segments:a. Load the originals for the next segment.b. When the Build Job screen appears, touch Program Next Segment.c. Using the appropriate tabs, select the required settings.d. Press the green Start button to scan the originals for that segment.4. Repeat the previous step for each remaining segment.5. When all of the segments have been programmed and scanned, touch Program Next Segment.6. Touch the Job Assembly tab, then touch Build Job.7. Using the alphanumeric keypad, enter the number of copies in the Quantity for Final Job field.8. In the upper right corner of the Build Job screen, touch Print the Job. The Job Progress screenappears.Note: If necessary, touch Delete > Delete Job to cancel the job.Printing a Sample CopyYou can print a test copy of a complex copy job, before printing multiple copies. This feature prints asingle copy and holds the remaining copies. After you inspect the sample, you can print or cancel theremaining copies.
