6 Related Drive ParametersYASKAWA ELECTRIC SIEP C730600 58A 1000-Series Option SI-EN3 Technical Manual EN 17F7-04(3E8)<5> <6><7>IP Address 4 Sets the static/fixed IP address.Parameter F7-04 sets the fourth most significant octet.Default: 20Range: 0 to 255F7-05(3E9)<7>Subnet Mask 1 Sets the static/fixed Subnet Mask.Parameter F7-05 sets the most significant octet.Default: 255Range: 0 to 255F7-06(3EA)<7>Subnet Mask 2 Sets the static/fixed Subnet Mask.Parameter F7-06 sets the second most significant octet.Default: 255Range: 0 to 255F7-07(3EB)<7>Subnet Mask 3 Sets the static/fixed Subnet Mask.Parameter F7-07 sets the third most significant octet.Default: 255Range: 0 to 255F7-08(3EC)<7>Subnet Mask 4 Sets the static/fixed Subnet Mask.Parameter F7-08 sets the fourth most significant octet.Default: 0Range: 0 to 255F7-09(3ED)<7>Gateway Address 1 Sets the static/fixed Gateway address.Parameter F7-09 sets the most significant octet.Default: 192Range: 0 to 255F7-10(3EE)<7>Gateway Address 2 Sets the static/fixed Gateway address.Parameter F7-10 sets the second most significant octet.Default: 168Range: 0 to 255F7-11(3EF)<7>Gateway Address 3 Sets the static/fixed Gateway address.Parameter F7-11 sets the third most significant octet.Default: 1Range: 0 to 255F7-12(3E0)<7>Gateway Address 4 Sets the static/fixed Gateway address.Parameter F7-12 sets the fourth most significant octet.Default: 1Range: 0 to 255F7-13(3F1) Address Mode at StartupSelects how the option address is set.0: Static <6>1: BOOTP2: DHCPDefault: 2Range: 0 to 2F7-14(3F2) Duplex Mode SelectionSelects duplex mode setting.0: Half duplex forced1: Auto-negotiate2: Full duplex forcedDefault: 1Range: 0 to 2F7-15(3F3)<8>Communication Speed SelectionSets the communication speed10: 10 Mbps100: 100 MbpsDefault: 10Range: 10, 100F7-17(3F5) EtherNet/IP Speed Scaling Factor Sets the scaling factor for the speed monitor in EtherNet/IP Class ID 2AHObject.Default: 0Min.: -15Max.: 15F7-18(3F6) EtherNet/IP Current Scaling Factor Sets the scaling factor for the output current monitor in EtherNet/IP ClassID 2AH Object.Default: 0Min.: -15Max.: 15F7-19(3F7) EtherNet/IP Torque Scaling Factor Sets the scaling factor for the torque monitor in EtherNet/IP Class ID 2AHObject.Default: 0Min.: -15Max.: 15F7-20(3F8) EtherNet/IP Power Scaling Factor Sets the scaling factor for the power monitor in EtherNet/IP Class ID 2AHObject.Default: 0Min.: -15Max.: 15F7-21(3F9) EtherNet/IP Voltage Scaling Factor Sets the scaling factor for the voltage monitor in EtherNet/IP Class ID2AH Object.Default: 0Min.: -15Max.: 15F7-22(3FA) EtherNet/IP Time Scaling Sets the scaling factor for the time monitor in EtherNet/IP Class ID 2AHObject.Default: 0Min.: -15Max.: 15No.(Addr.Hex) Name Description Values