YASKAWA DX200 Instructions Manual

Also see for Motoman DX200: Instruction manual Instructions Instructions Setup procedure Instructions

YASKAWA DX200 Instructions Manual Manual pdf 42 page image

4 Other Functions4.4 Operation Function by Dedicated Input4-10165467-1CDHW1481803Pendant OscilloscopeFunction4.4.2 Dedicated Output SignalDisplays PP oscilloscope operation status. When PP oscilloscope is notrunning, all signals are OFF. 50903: Pendant Oscilloscope Under MeasurementNotifies that measurement is currently performed.Only this signal varies regardless of S2C1244 setting. 51170: Pendant Oscilloscope RunningNotifies that PP oscilloscope is running.This signal is turned ON even if PP oscilloscope is in minimizedstatus. 51171: Pendant Oscilloscope MinimizedNotifies that PP oscilloscope is in minimized status.50907 50906 50905 50904 50903 50902 50901 50900SOUT#720 SOUT#719 SOUT#718 SOUT#717 SOUT#716 SOUT#715 SOUT#714 SOUT#713MEASURINGPP-OSC51177 51176 51175 51174 51173 51172 51171 51170SOUT#936 SOUT#935 SOUT#934 SOUT#933 SOUT#932 SOUT#931 SOUT#930 SOUT#929OSCSAVE ERROROSCSAVINGOSCMEAS.ERROROSC I/OREADYOSCMINIMIZEOSCRUNNINGStateStateSUPPLE-MENTPP oscilloscope is minimized by the following factors:• The {MINIMIZE} button is pressed.• An alarm or an error occurs.The minimized status can be cancelled by selecting {Pendantoscilloscope} from the main menu or using the startrequesting signal (40760).State42 of 48