www.dadehpardazan.ir 88594014-157 Utility Functions (Fn)7-127.7 Clearing Alarm History (Fn006)The clear alarm history function deletes all of the alarm history recorded in the SERVOPACK.Note: The alarm history is not deleted when the alarm reset is executed or the main circuit power supply of the SERVO-PACK is turned OFF.(1) PreparationThe follow conditions must be met to clear the alarm history.• The write prohibited setting parameter (Fn010) must be set to Write permitted (P.0000).(2) Operating ProcedureUse the following procedure.Step Display after Opera-tion Keys Operation1 Press the MODE/SET Key to select the utility function.2 Press the UP or DOWN Key to select Fn006.3 Press the DATA/SHIFT Key for approximately one second.The display shown on the left appears.4Press the MODE/SET Key to clear the alarm history.When the data is cleared, "donE" flashes on the display andreturns to the screen as shown on the left.5 Press the DATA/SHIFT Key for approximately one second."Fn006" is displayed again.MODE/SET DATA /MODE/SET DATA/MODE/SET DATA/MODE/SET DATA/MODE/SET DATA/
