2-6IMPORTANT2-wire or 3-wire sequence selection must be made prior to any other adjustments (Parameter n001).2.3 V/f STARTUP PROCEDUREDIGITAL OPERATORDESCRIPTION KEY SEQUENCE DISPLAYTable 2-2. V/f Startup ProcedureSet the highest parameteraccess level.This will allow all parametersto be viewed and set.Press key until the LED is liton the digital operator.PRGMDSPLSet drive for V/f control.This is accomplished by set-ting n002 = 0 Press then .DATAENTERVPRGMPRGMPRGMPRGMPRGMPRGMPRGMThen press .DATAENTERUse the & keys to set a “0”in the display.VVPress .DATAENTERPress .DATAENTERPress three times.V
