YASKAWA VIPA IM 053EC Manual
Also see for VIPA IM 053IP: Manual
                                                                                                      | |
Contents
| 
1 Shield bus carrier2 Shield bus (10mm x 3mm)3 Shield clamp4 Cable shieldTo attach the shield the mounting of shield bus carriers are necessary. The shield buscarrier (available as accessory) serves to carry the shield bus to connect cable shields.1. Each System SLIO module has a carrier hole for the shield bus carrier. Push theshield bus carrier, until they engage into the module. With a flat mounting rail foradaptation to a flat mounting rail you may remove the spacer of the shield bus car-rier.2. Put your shield bus into the shield bus carrier.3. Attach the cables with the accordingly stripped cable screen and fix it by the shieldclamp with the shield bus.2.6 Demounting2.6.1 Demounting bus couplerCAUTION!Bus interface and power module may not be separated! Here you mayonly exchange the electronic module!1. Power-off your system.2. Remove if exists the wiring of the bus coupler.Shield attachmentProceedingVIPA System SLIOBasics and mountingDemounting > Demounting bus couplerHB300 | IM | 053-1EC01 | en | 18-4926 |
Related manuals for YASKAWA VIPA IM 053IP
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine