YASKAWA VIPA IM 053EC Manual
Also see for VIPA IM 053IP: Manual
                                                                                                      | |
Contents
| 
4.5 Accessing the web server via EthernetOn delivery the EtherCAT coupler has no IP address. To be able to access the EtherCATcoupler via EoE, you have to assign data to this IP address. The following options in theSPEED7 EtherCAT Manager are available:Configuration - slave station - Ethernet (EoE)n Port Mode:– Switch Port (is not supported)– IP Portn Overwrite IP Settings:– IP Address– Subnet Mask– Default Gateway– DNS Server (is not supported)– DNS Name (is not supported)4.5.1 Web serverThe activation is carried out via the Command object 0x2000 (Default: deactivated).Ä ‘Command’ page 81Proceduren Use Parameter (object 0x2000:02) to determine whether the web server is enable("1") or disable ("0"),n use Execute Command (object 0x2000:01) to issue the command 0x00008001 (Setweb server state),n Status (object 0x2000: 03) indicates whether the command was executed success-fully or incorrectly.– 1: command executed– 2: command not executed– 3: command unknown– 4: command not executable in this stateThe setting is saved remanently.Access via Ethernet (EoE)Activate / deactivate webserverVIPA System SLIODeploymentAccessing the web server via Ethernet > Web serverHB300 | IM | 053-1EC01 | en | 18-4966 |
Related manuals for YASKAWA VIPA IM 053IP
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine