15The numeric keys1. Touch the frequency displayed on the LCD.The numeric keypad appears.2. Enter the frequency using the numeric keys.Example: To input 145.520 MHz1 ĺ 4 ĺ 5 ĺ 5 ĺ 2Example: To input 430.000 MHz4 ĺ 3 ĺ ENTWhen entering a frequency using the numeric keys,it may be canceled by pressing the PTT switch or the[BACK] key.Changing the Frequency StepThe DIAL knob rotation frequency step may be changed. Normally, the factory defaultsetting will provide a good frequency step.1. Press and hold the [DISP] key, then touch [CONFIG].2. Touch [18 STEP] then rotate the DIAL knob to change the frequency step.3. Press the PTT switch to save the setting and return to normal operation.In the default setting, of the frequency step is set to “AUTO”, which automatically providesa suitable frequency step according to the frequency band.