Yaesu FT3DR Operating Manual

Also see for FT3DR: Instruction manual Instruction manual Operating manual Instruction manual Advanced manual

16Selecting the Communication ModeUsing AMSThe FT3DR transceiver is equipped with the AMS (Auto-matic Mode Select) function which automatically selectsthe communication mode corresponding to the receivedsignal.To utilize the AMS function, touch [MODE] to display“ ”* on the display. After receiving the signal, “FM” of“ ” will be changed according to the received signal.*The display differs depending on the received signal.Setting the transmission mode when using theAMS functionThe AMS function will automatically set the receiver tothe mode of the received signal, but the transmissionmode may be fixed regardless of the received mode.1. Touch [AUTO]* to tune to the desired transmissionmode as follows.*The display differs depending on the transmissionmode.Transmit Mode Receive and TransmitAUTO(default)5HFHLYHʟ Automatically selects the communication mode of transmission accordingto the signal being received.Transmit: Transmits automatically in the communication mode selected by the AMSfunction.TX FM5HFHLYHʟ Automatically selects the communication mode of transmission accordingto the signal being received.Transmit: Always transmits in the analog FM mode.TX DN(TX DIGITAL)5HFHLYHʟ Automatically selects the communication mode of transmission accordingto the signal being received.7UDQVPLWʟ Always transmits in the DN mode.