Yaesu FT3DR Operating Manual

Also see for FT3DR: Instruction manual Instruction manual Operating manual Instruction manual Advanced manual

4Controls & ConnectionsTransceiverGPS AntennaAntenna Jack (SMA)*TX/BUSY LEDLights green (A-band) or blue (B-band)during receive and lights red during trans-mit.PTT SwitchPress and hold the PTT switch to transmit,and release it to receive.MONI/T-CALL SwitchPress the MONI/T-CALL switch to openthe squelch.SQL SwitchPress the SQL switch, then rotate the VOLknob to adjust the squelch level.Power (Lock) SwitchWhen the power is OFF, press and holdthis switch to turn the Power ON.When the power is ON, press and holdthe switch again to turn the Power OFF.When the power is ON, press this buttonbriefly to engage, or release the key lock.Battery Pack*MicrophoneDIAL knobRotate the DIAL Knob to change the fre-quency or select a memory channel.VOL knobRotate the VOL Knob to to adjust the audiovolume level.Full Color Touch screen displayTouch to set the frequency and variousother settings.KeypadBACK keyPress to return to the previous screen.DISP keyPressing each time switches between thefrequency display and the backtrack dis-play.Press and hold for over one second toenter Set mode.BAND keyPressing each time increases the fre-quency band.Ȥ keyIn normal mode, press to start WIRES-X.When WIRES-X is activated, press andhold for over one second to return to thenormal mode.GM keyPress to turn the GM function on/off.Press and hold for over one second toenter DG-ID number setting screen.A/B keyPressing each time switches betweenA-band and B-band.Press and hold for over one second toswitch between the Dual Band Receivemode and the Mono Band Receive mode.V/M] keyPressing each time switches betweenVFO mode and memory mode.