Yaesu FT3DR Operating Manual

Also see for FT3DR: Instruction manual Instruction manual Operating manual Instruction manual Advanced manual

37Set mode no. / item Description Selectable options(Options in bold are the default settings)6 PRIORITY REVERT Turn the “Priority Channel Revert”feature ON or OFF during DualReceive.ON / OFFGM* For details of the functions, refer to the GM Function Instruction Manual.1 DP-ID LIST Displays the DP-ID list screen. –2 RADIO ID CHECK Display the transceiver specificnumber (ID). (Uneditable) –WIRES-X* For details of the functions, refer to the WIRES-X Instruction Manual.1 RPT/WIRES FREQ Set the frequency to be used forRepeater/WIRES.MANUAL / PRESET2 SEARCH SETUP Set the WIRES ROOM selectionmethod.HISTORY / ACTIVITY3 EDIT CATEGORY TAG Edit category tags. C1 to C54 REMOVE ROOM/NODE Delete registered Category ROOMs. C1 to C55 DG-ID Set the DG-ID number for WIRES-X. 01 to 99 / AUTOCONFIG1 APO Set the length of time until thetransceiver turns off automatically.OFF / 0.5HOUR to 12HOUR2 BCLO Turn on/off the busy channel lockoutfunction.ON / OFF3 BEEP Set the beep emitting function, andset whether or not to emit the beepsound when a band edge/CH1 isencountered.SELECT KEY&SCAN / KEY / OFFEDGE ON / OFF4 BUSY LED Turn on/off the BUSY indicator. A BAND ON / OFFB BAND ON / OFFRADIO ON / OFF5 CLOCK TYPE Set the clock shift function. A / B6 GPS LOG Set the GPS log recording timeinterval.OFF / 1sec / 2sec / 5sec / 10sec / 30sec /60sec7 HOME VFO Enable/disable VFO transmission inHome Channel.ENABLE / DISABLE8 LOCK Configure the lock mode setting. KEY&DIAL / PTT / KEY&PTT / DIAL&PTT /ALL / KEY / DIAL9 MONI/T-CALL Select the function of the MONI/T-CALL switch.MONI / T-CALL10 TIMER Switch the timer between ON andOFF.POWER ON 00:00 23:59POWER OFF 00:00 23:5911 PASSWORD Input the password. OFF / ON : - - - -12 PTT DELAY Set the PTT delay time. OFF / 20ms / 50ms / 100ms / 200ms13 RPT ARS Turn the ARS function on/off. ON / OFF14 RPT SHIFT Set the repeater shift direction. SIMPLEX / -RPT / +RPT15 RPT SHIFT FREQ Set the repeater shift width. 0.000MHz to 150.000MHz16 SAVE RX Set the receive save time. OFF / 0.2sec (1:1) to 60.0sec (1:300)17 STEP Set the channel step. AUTO / 5.0KHz / 6.25KHz / (8.33KHz) /(9.0KHz) / 10.0KHz / 12.5KHz / 15.0KHz /20.0KHz / 25.0KHz / 50.0KHz / 100KHz18 DATE & TIME ADJ Set the built-in clock. -19 TOT Set the timeout timer. OFF / 30sec to 10MIN20 VFO MODE Select the frequency selection rangein the VFO mode.ALL / BAND21 DIAL KNOB CHANGE Select a vibrator mode and set up thevibrator function. -