35Tables of Set Mode OperationsSet mode no. / item Description Selectable options(Options in bold are the default settings)DISPLAY1 TARGET LOCATION Set what to display using the smartnavigation function.COMPASS / NUMERIC2 COMPASS Set the compass display of the smartnavigation function.HEADING UP / NORTH UP3 BAND SCOPE Set the number of search channelsfor the band scope function.17ch / 35ch / 71ch4 LAMP Set the duration time of the backlightand keys to be lit.KEY: OFF / 2 to 180 / CONTINUOUSKEY 30SecSAVE: ON / OFF5 LANGUAGE Switch between Japanese/English forthe menus and Set mode, etc.ENGLISH / JAPANESE6 LCD DIMMER Set the brightness level of the LCDbacklight and numeric keypad light.LEVEL1 to LEVEL67 OPENING MESSAGE Set the opening message type. OFF / DC / MESSAGE8 SENSOR INFO Display the voltage. DC9 SOFTWARE VERSION Display the software version. Main / Sub / DSPTX/RX1 MODE1 ANTENNA ATT Switch the attenuator between ON/OFF.ON / OFF2 FM BANDWIDTH Set the FM transmission modulationlevel.WIDE / NARROW3 RX MODE Select the receive mode. AUTO / FM / AM2 DIGITAL1 DIGI POPUP Set the POP UP time. OFF / BAND2s / BAND4s / BAND6s /BAND8s / BAND10s / BAND20s /BAND30s / BAND60s / BNDCNT2 LOCATION SERVICE Set whether or not to display yourcurrent location in digital mode.ON / OFF3 STANDBY BEEP Switch the standby beep functionbetween ON/OFF.ON / OFF4 DIGITAL VW Turn the VW mode selection ON orOFF.OFF / ON3 AUDIO1 MIC GAIN Adjust the microphone gain level. LEVEL1 to LEVEL9 LEVEL52 MUTE Set the muting level on thenonoperating band side when a signalis received on the operating bandside.OFF / MUTE 30% / MUTE 50% /MUTE 100%3 RX AF DUAL Set the resumption time of radioreception in the AF Dual mode.Transmit and receive 1 second to10 seconds, Fixed, or transmission 1 secondto 10 seconds.Transmit and receive 2 seconds4 VOX function setting. VOX: OFF / LOW / HIGHDELAY: 0.5s / 1.0s / 1.5s / 2.0s / 2.5s / 3.0s5 RECODE Voice recode function setting. BAND: A / B / A+BMIC: ON / OFF