Yaesu FT3DR Operating Manual

Also see for FT3DR: Instruction manual Instruction manual Operating manual Instruction manual Advanced manual

41Restoring to Defaults (Reset)CautionWhen the All Reset function is performed, all data registered in the memory will be deleted. Besure to note the settings on paper or back up the data on a microSD memory card. For details onhow to save backup onto a microSD memory card.All ResetTo restore all transceiver settings and memory content to the factory defaults.1. Turn the transceiver OFF.2. Press and hold the [BACK] key, the [DISP] key and the [BAND] key and turn thetransceiver ON simultaneously.The beep sounds and the confirmation screen is displayed.3. Touch [OK].The beep will sound, and the transceiver will reset all factory defaults.After resetting all defaults, the call sign input message appears on the LCD. Setthe call sign.To cancel the resetting, touch [CANCEL].Set Mode ResetAll the Set mode only, settings can be restored to the default settings.1. Turn the transceiver OFF.2. Press and hold the [BACK] key and the [DISP] key and turn the transceiver ONsimultaneously.The beep sounds and the confirmation screen is displayed.Touch [OK].The beep will sound, and the transceiver will reset all Set mode settings are resetto defaults.To cancel the resetting, touch [CANCEL].