Yaesu FTM-10R Operating Manual

Also see for FTM-10R: Brochure & specs Technical supplement Manual Easy Programming Guide

39FTM-10R O PERATING M ANUALSCAN T YPEThe FTM-10R has two methods of performing Memory Channel Scan; (1) All MemoryChannel Scanning and (2) Scanning only memory channels which are selected via the Skip/Preferential memory setting (see next step).1. Press the front panel key to switch to the Memory mode, if needed.2. Press and hold the key for one second to enter the Memory Channel Customizationmode.3. Rotate the DIAL knob to select Menu Item “M5 SCN TYPE”.4. Press the key briefly.5. Rotate the DIAL knob to select desired Scan Type:ALL MEM: The FTM-10R scans on all Memory Chan-nels.ONLY MEM: The FTM-10R scans only the memory chan-nels that are appended with the “ONLY” flagvia the Skip/Preferential memory setting.6. Press the [VOL/SEL] key to return to the memory recallmode. The memory channel frequency will now be displayed.SKIP /P REFERENTIAL S CAN S ETTINGThe FTM-10R allows you to set up a “Preferential Scan List”. You can “flag” channelswithin the memory system. When you initiate the Preferential Memory Scan, only “flagged”channels will be scanned.1. Recall the memory channel that you wish to skip. (or Preferential Memory Channel).2. Press and hold the key for one second to enter the Memory Channel Customizationmode.3. Rotate the DIAL knob to select Menu Item “M6 SKIPONLY”.4. Press the key briefly.5. Rotate the DIAL knob to select the desired Scan Type:SKIP: This memory channel is skipped during memorychannel scans.ONLY: This memory channel scans during preferentialmemory scans.OFF: This memory channel scans during memory chan-nel scan.6. Press the [VOL/SEL] key to return to the memory recall mode. The memory channelfrequency will now be displayed.MEMORY O PERATION