Yaesu FTM-10R Operating Manual

Also see for FTM-10R: Brochure & specs Technical supplement Manual Easy Programming Guide

89FTM-10R O PERATING M ANUALMENU (“SET ”) M ODEMenu ItemRPT SFTRX EXPRX F CCLRX M MODSCN CVRGSCN DRCTSCN MODESCN STRTSPEAKERSQL BELLSQL DCSSQL EXPSQL LEVLSQL TSQFSQL TYPESTEPSTEREOTOTTX POWERVOL.ITCOMVOX MICVOX SENSWIRESWX ALERTFunctionSets the magnitude of the repeater Shift.Enables/Disables the band expansion.Shifting of the CPU clock frequency.Selects the receiving mode.Selects the Scan range.Select the Scan type.Selects the Scan Resume mode.Select the scan start direction which initiates the scanner using thescan command by pressing the key.Select the Speaker to be used.Selects the number of CTCSS/DCS/EPCS Bell ringer repetitions.Setting of the DCS code.Enables/Disables split CTCSS/DCS coding.Set the squelch threshold level.Setting of the CTCSS Tone Frequency.Selects the Tone Encoder and/or Decoder mode.Setting of the synthesizer steps.Select the audio output.Setting of the TOT time.Selects the transmit power output level.Sets the volume level of the intercom mode.Enables/Disables VOX operation.Sets the VOX sensitivity.Enable/Disable the Internet Connection feature.Enables/Disables the Weather Alert Scan feature.Available Values(Default: Bold Itaric)0.00 ~ 99.95 MHz (Ú)(50 kHz increments)NORMAL/EXPANDOFF/ONAUTO/WIDE FM/FMNARR FM/AMIN BAND/HAM BANDNORMAL/RETURNBUSY/HOLD/TIME 3S/TIME5S/TIME 10SUP START/DN.STARTREAR/F+R/FRONT/OFFOFF/1T/3T/5T/8T/CONT104 standard DCS codes (023)OFF/ONSQL OFF/SQL MIN/SQL 01 ~SQL 06/ SQL MAXAmateur Bands: SQL 01AM: SQL 01, FM: SQL 0250 CTCSS Tones (100 Hz)OFF/TONE ENC/TONE SQL/REV TONE/DCS5.00/6.25/8.33/10.00/12.50/15.00/20.00/25.00/50.00/100.00/200.00 kHz, AUTOSTEREO/MONO1MIN ~ 30MIN, OFFLOW/MID/HIGHIVOL HI/IVOL LOWVOX OFF/R-HAND/F-HAND/FRONTMIN/1/2/3/4/5/6/7/8/MAXOFF/CODE/MEMOFF/ONÚÚÚÚÚ: Depends on the band of operation.Item#262728293031323334353637383940414243444546474849