Yaesu FTM-10R Operating Manual

Also see for FTM-10R: Brochure & specs Technical supplement Manual Easy Programming Guide

6 FTM-10R O PERATING M ANUALREAR P ANEL & LCDConnect this pigtail to the car battery directly with the supplied DC cable.P Connect the red lead to the positive side (+) of the battery and connect theblack lead to the negative side (-) of the battery. The DC cable is as short aspossible, because transmitting requires a high DC electrical current flow.P Performance may be significantly reduced when connecting the DC cableto the cigarette lighter plug or fuse box.P Install a line filter if your vehicle has objectionable alternator noises.DC 13.8 V Cable Pigtail w/FuseConnect an efficient 144/430 MHz an-tenna, which is adjusted to 50-Ohm im-pedance. Use low-loss 50-Ohm coaxialcable with type-M (PL259) connector.ANT jackYou may connect an optionalCAB-1 Bluetooth ® Head SetCharger Sleeve here.You may connect an optionalMEK-M10 Microphone Jackhere.Digital Code Squelch (DCS) OperationCTCSS OperationRepeater Shift DirectionS- & PO MeterInternet ConnectionFeature ActiveOperating FrequencyVolume levelDTMF Feature ActiveMemory Mode SelectedOperating bandStereo AudioClub Channel MonitorFeature Active