VX-3R O PERATING M ANUAL50MOVING M EMORY DATA TO THE VFOData stored on memory channels can easily be moved to the VFO, if you like.1. Select the memory channel containing the frequency data to bemoved to VFO.2. Press and hold in the [F/W] key for one second, then press the[V/M] key. The confirmation massage (V-WRT?V-WRT?V-WRT?V-WRT?V-WRT?) will appear onthe display. Press the [F/W] key to cancel the Moving MemoryData procedure, if desired.3. Press the [V/M] key once more. The data will now have beencopied to the VFO, although the original memory contents willremain intact on the previously stored channel.If a Split Frequency Memory channel was transferred,the Tx frequency will be ignored (you will be set up for Simplex operation onthe Receive frequency).MEMORY ONLY M ODEOnce memory channel programming has been completed, you may place the radio in a“Memory Only” mode, whereby VFO operation is impossible. This may be particularlyuseful during public-service events, where a number of operators may be using the radiofor first time, and ultimate simplicity of channel selection is desired.To place the radio into the Memory Only mode, turn the radio off. Now press and hold inthe [V/M] key while turning the radio on. To return to normal operation, repeat the abovepower-on procedure.M EMORY MODE (REGULAR M EMORY CHANNEL OPERATION)