VX-3R O PERATING M ANUAL 69S ETTING THE CHANNEL COUNTER SWEEP WIDTHYou may change the bandwidth of the Channel Counter. Available selections are ±5, ±10,±50, and ±100 MHz (default: ±5 MHz).Here is the procedure for setting the Channel Counter Bandwidth:1. Press and hold in the [TXPO] key for one second to enter the Set mode.2. Rotate the DIAL knob to select Set Mode Item 17: CH CNTCH CNTCH CNTCH CNTCH CNT.Note: Do not forget to pull the DIAL knob to rotate the DIALknob.3. Press the [TXPO] key momentarily to enable adjustment of thisSet Mode Item.4. Rotate the DIAL knob to select the desired bandwidth.5. When you have made your selection, press the PTT switch tosave the new setting and exit to normal operation.CHANNEL C OUNTER O PERATION
