60H5E116Ring nut wrench 4:90890-06512Ring nut wrench extension:90890-065136-42Removing the propeller shaft housingassembly and propeller shaft1. Pull up the claw washer tabs.2. Remove the ring nut.60h601203. Remove the propeller shaft housing.60h6013060h60135NOTE:Make sure that the shims left in the lower casehave been removed.4. Remove the propeller shaft.5. Remove the slide shift 4.6. Remove the spring 5, pull out the crosspin 6, and remove the dog clutch 7.NOTE:Mark the dog clutch so that it will be reinstalledin correct orientation.7. Pull out the slider assembly 8.60h61250NOTE:Take precautions so that the ball will not jumpout while pulling out the slider.Propeller shaft, Propeller shaft housing (counter rotation model)Bearing housing puller claw L 1:90890-06502Center bolt 2:90890-06504Stopper guide plate 3:90890-06501
