60H5E1137. Move the magnet control lever 1 until thestandard ignition timing adjusting screw 3touches the fully closed stopper 4 on thecylinder block.60H30190Standard ignition timing: ATDC 7°Control system3-85. Check that the mark B on flywheel mag-net is aligned with the mark C on base as-sembly.60H301706. Turn the flywheel clockwise until the igni-tion mark on the flywheel magnet is alignedwith the pointer mark A on the timing plateat the standard ignition timing.60H301808. Check that the mark B on flywheel mag-net is aligned with the mark C on base as-sembly.60H302009. Adjust the ignition timing when the align-ment of the marks BC could not be at-tained for either or both of the fully ad-vanced ignition timing and standard igni-tion timing.Adjusting the ignition timing1. Disconnect the throttle cable.2. Remove the intake silencer and flywheelcover.3. Remove all the spark plugs.4. Set the #1 cylinder at top dead center.60H30195
