60H5E11Power unitPOWR5-23Removing the cylinder head1. Remove the spark plugs.2. Remove the thermostat cover and the ther-mostat.60H50300NOTE:Loosen the bolts in the sequence shown.3. Remove the cylinder head cover.60H50310NOTE:Loosen the bolts in the sequence shown.4. Remove the thermoswitch.5. Remove the cylinder head.60H50320NOTE:Loosen the bolts in the sequence shown.6. Check the anodes on the cylinder block.Clean the anode's surface, and replace if ithas been eroded into half or smaller.60H50330Do not oil, grease, or paint the anodes, oth-erwise they will not be able to prevent thegalvanic corrosion effectively.7. Clean out the mineral deposits and con-tamination on the cylinder head. Also checkthe possible corrosion on the cylinder head.Replace it if necessary.8. Remove the carbon deposits on the sur-face of combustion chamber.Do not scratch the contacting surface ofthe cylinder head and cylinder block.
