Yamaha 55DEHD Service Manual

Also see for 55DEHD: Rigging guide Rigging guide

FUEL4- 6885J117. Install the spring p, pilot screw a, thenturn it in until it is lightly seated, and thenturn it out the specified number of turns.8. Install the new gaskets s, carburetorassembly d, new gasket f, carburetorcaps g, intake silencer h and bolts j.9. Install the new gasket k, cover l, wash-ers ; and screws z, and then install thelink rod x and rods c.NOTE:9 Temporarily install the carburetor caps g tothe intake silencer h, and then tighten thebolts j.9 Synchronizing the carburetor, adjust thethrottle cable and engine idle speed when-ever the carburetor has been disassem-bled.9 For the adjustment procedures mentionedabove, refer to chapter 3.10. Install the choke solenoid v and O-ringb. (ED, ET)68840090p a68840110vbn6F640100Pilot screw setting:55D, 75A:1–1 1/2 turns out85A:7/8–1 3/8 turns outs df gjh kl;zzxccj;688401004-15Fuel systemIntake manifold bolt n:12 N·m (1.2 kgf·m, 8.9 ft·lb)