30InstallationEMU26902InstallationThe information presented in this section isintended as reference only. It is not possibleto provide complete instructions for everypossible boat and motor combination. Prop-er mounting depends in part on experienceand the specific boat and motor combination.WARNINGEWM01590 Overpowering a boat could cause se-vere instability. Do not install an out-board motor with more horsepowerthan the maximum rating on the capac-ity plate of the boat. If the boat does nothave a capacity plate, consult the boatmanufacturer. Improper mounting of the outboard mo-tor could result in hazardous condi-tions such as poor handling, loss ofcontrol, or fire hazards. For permanent-ly mounted models, your dealer or oth-er person experienced in properrigging should mount the motor.EMU32011Mounting the outboard motor1. Be sure to mount the outboard motorwhile the boat is on land. If the boat is onthe water, move it to an area on land.2. To prevent steering movement, turn theadjuster lever to “A”.3. Hold the handgrips and steering brack-ets as shown in the illustration and lift upthe outboard motor using two people.4. Mount the outboard motor on the centerZMU05632A1. Steering bracket2. HandgripZMU056331122ZMU05634
