Trouble Recovery93(2) Put the engine in the desired position,then tighten the manual valve screw byturning it clockwise.EMU41471Water separator-alert indicator blinkswhile cruisingEWM01501Gasoline is highly flammable, and its va-pors are flammable and explosive. Do not perform this procedure on a hotor running engine. Allow the engine tocool. There will be fuel in the fuel filter. Keepaway from sparks, cigarettes, flames orother sources of ignition. This procedure will allow some fuel tospill. Catch fuel in a rag. Wipe up anyspilled fuel immediately. The fuel filter must be reassembledcarefully with the O-ring, filter cup, andhoses in place. Improper assembly orreplacement could result in a fuel leak,which could result in a fire or explosionhazard.If the water separator-alert indicator on the6Y8 Multifunction tachometer blinks, performthe following procedure.F40H, F50H, FT50J, F60F, FT60G(1) Stop the engine.(2) Remove the top cowling.(3) Remove the plastic tie.(4) Disconnect the water detection switchcoupler. NOTICE: Be careful not to getany water on the water detectionswitch coupler, otherwise a malfunc-tion could occur. [ECM01951]1. Manual valve screw1ZMU036681. Water separator-alert indicator1. Plastic tie1ZMU054411ZMU07929