Operation64EMU32852Power trim and tilt modelsThe outboard motor can be tilted up partiallyto allow operation in shallow water.ECM00261Do not tilt the outboard motor up so thatthe cooling water inlet on the lower unit isabove the surface of the water when set-ting up for and cruising in shallow water.Otherwise severe damage from overheat-ing can result.EMU32914Procedure for power trim and tilt models(1) Place the remote control lever / gearshift lever in neutral.(2) Slightly tilt the outboard motor up to thedesired position using the power trimand tilt switch. WARNING! Using thepower trim and tilt switch on the bot-tom cowling while the boat is movingor engine is on could increase therisk of falling overboard and coulddistract the operator, increasing therisk of collision with another boat oran obstacle. [EWM01851](3) To return the outboard motor to the nor-ZMU03648NZMU01771UPZMU01935