Operation55EMU31743Stopping boatEWM01511 Do not use the reverse function to slowdown or stop the boat as it could causeyou to lose control, be ejected, or im-pact the steering wheel or other parts ofthe boat. This could increase the risk ofserious injury. It could also damage theshift mechanism. Do not shift into reverse while travelingat planing speeds. Loss of control, boatswamping, or damage to the boat couldoccur.The boat is not equipped with a separatebraking system. Water resistance stops it af-ter the throttle lever is moved back to idle.The stopping distance varies depending ongross weight, water surface conditions, andwind direction.EMU30881TrollingEMU30891Adjusting trolling speedThe trolling speed on outboard motorsequipped with the variable trolling RPMswitches can be adjusted approximately 50r/min with each press of a switch.To increase the trolling speed, press the “ ”switch.To decrease the trolling speed, press the“ ” switch.TIP: The trolling speed changes approximately50 r/min each time a switch is pressed. If the trolling speed has been adjusted, theengine returns to the normal trolling speedwhen the engine is stopped and restartedor when the engine speed exceeds ap-proximately 3000 r/min.EMU27822Stopping engineBefore stopping the engine, first let it cool offfor a few minutes at idle or low speed. Stop-ping the engine immediately after operatingNZMU017711. “ ” switch2. “ ” switch11212