Components22EMU26191Remote control leverMoving the lever forward from the neutral po-sition engages forward gear. Pulling the le-ver back from neutral engages reverse. Theengine will continue to run at idle until the le-ver is moved about 35 (a detent can be felt).Moving the lever farther opens the throttle,and the engine will begin to accelerate.EMU26202Neutral interlock triggerTo shift out of neutral, first pull the neutral in-terlock trigger up.EMU26213Neutral throttle leverTo open the throttle without shifting into ei-ther forward or reverse, put the remote con-trol lever in the neutral position and lift theneutral throttle lever.TIP:The neutral throttle lever will operate onlywhen the remote control lever is in neutral.The remote control lever will operate only1. Power trim and tilt switch2. Remote control lever3. Neutral interlock trigger4. Neutral throttle lever5. Main switch6. Engine shut-off switch7. Throttle friction adjuster1. Neutral “ ”2. Forward “ ”3. Reverse “ ”4. Shift5. Fully closed12 35467ZMU0172312 34 45566 77F N RZMU017256. Throttle7. Fully open1. Neutral interlock trigger1. Fully open2. Fully closed1ZMU0172712NZMU01728