Components24difficult to move the remote control leveror throttle grip, which could result in anaccident. [EWM00033]When constant speed is desired, tighten theadjuster to maintain the desired throttle set-ting.EMU25996Engine shut-off cord (lanyard) andclipThe clip must be attached to the engine shut-off switch for the engine to run. The cordshould be attached to a secure place on theoperator’s clothing, or arm or leg. Should theoperator fall overboard or leave the helm, thecord will pull out the clip, stopping ignition tothe engine. This will prevent the boat fromrunning away under power. WARNING! At-tach the engine shut-off cord to a secureplace on your clothing, or your arm or legwhile operating. Do not attach the cord toclothing that could tear loose. Do notroute the cord where it could become en-tangled, preventing it from functioning.Avoid accidentally pulling the cord dur-ing normal operation. Loss of enginepower means the loss of most steeringcontrol. Also, without engine power, theboat could slow rapidly. This could causepeople and objects in the boat to bethrown forward. [EWM00123]EMU26004Engine stop buttonThe engine stop button stops the engineZMU017141. Engine shut-off cord (lanyard)2. Clip3. Engine shut-off switch1. Engine shut-off cord (lanyard)2. Clip3. Engine shut-off switchZMU01716123111222333