CLUTCH5-50EAS25140CHECKING THE CLUTCH SPRINGSThe following procedure applies to all of theclutch springs.1. Check:• Clutch springDamage → Replace the clutch springs as aset.2. Measure:• Clutch spring free length “a”Out of specification → Replace the clutchsprings as a set.EAS25150CHECKING THE CLUTCH HOUSING1. Check:• Clutch housing dogsDamage/pitting/wear → Deburr the clutchhousing dogs or replace the clutch hous-ing.NOTE:Pitting on the clutch housing dogs will causeerratic clutch operation.2. Check:• BearingDamage/wear → Replace the bearing andclutch housing.EAS25160CHECKING THE CLUTCH BOSS1. Check:• Clutch boss splinesDamage/pitting/wear → Replace the clutchboss.NOTE:Pitting on the clutch boss splines will causeerratic clutch operation.EAS25170CHECKING THE PRESSURE PLATE1. Check:• Pressure plate “1”Cracks/damage → Replace.• Bearing “2”Damage/wear → Replace.EAS25220CHECKING THE PULL LEVER SHAFT ANDPULL ROD1. Check:Clutch spring free length52.5 mm (2.07 in)Limit49.9 mm (1.96 in)
