CLUTCH5-52• Lock the threads on the clutch boss nut bystaking them with a drift punch at the pointaligned with the groove in the axle.• While holding the clutch boss assembly “1”with the clutch holding tool “3”, tighten theclutch boss nut.6. Lubricate• Friction plates• Clutch plates(with the recommended lubricant)7. Install:• Friction plate 2• Clutch plate 1 “1”8. Install:• Friction plate 1 “1”NOTE:Install the last friction plate shifting half phase.9. Install:• Bearing• Pull rod “1”• Pressure plate “2”• Clutch springs• Clutch spring bolts “3”NOTE:Tighten the clutch spring bolts in stages and ina crisscross pattern.Universal clutch holder90890-04086YM-91042Recommended lubricantEngine oilClutch spring bolt10 Nm (1.0 m·kg, 7.2 ft·lb)
