SHIFT SHAFT5-56ET2D1011REMOVING THE SHIFT SHAFT1. Remove:• Clutch assemblyRefetr to "CLUTCH" on page 5-442. Remove:• Shift arm• Shift rodRefetr to "ENGINE REMOVAL" on page 5-23. Remove:• Circlip “1”• Washer “2”(left side of the engine)4. Remove• Shift shaft “1”• Shift shaft spring “2”• Collar• Washer5. Remove:• Stopper lever spring “1”• Stopper screw “2”• Stopper lever “3”• WasherEAS25420CHECKING THE SHIFT SHAFT1. Check:• Shift shaft “1”Bends/damage/wear → Replace.• Shift shaft spring “2”• Collar “3”Damage/wear → Replace.EAS25430CHECKING THE STOPPER LEVER1. Check:• Stopper lever “1”Bends/damage → Replace.Roller turns roughly → Replace the stopperlever.EAS25450INSTALLING THE SHIFT SHAFT1. Install:• Washer• Stopper lever “1”• Stopper screw “2”Stopper screw22 Nm (2.2 m·kg, 16 ft·lb)LOCTITE®
