INSTRUMENT AND CONTROL FUNCTIONS4-25123456789101112Select “Shift IND Brightness”, then usethe wheel switch to adjust the setting.Short push the wheel switch to confirmthe setting and exit.“Tach IND Setting”This function allows you to turn the ta-chometer color display on or off. Whenturned off, the tachometer will displayall r/min levels below the red zone inblack or white (depending on wallpapersettings). When turned on, the mid andmid-to-high r/min zones can be set tocome on in green and then orange col-ors.1. Select “Tach IND Setting”.2. Select “IND Mode”.3. Select ON to turn the tachometercolor display mode on (or selectOFF to turn this function off).4. Select “Tach IND 1st” to set thegreen zone starting r/min.5. Set the starting r/min by rotatingand then short pushing the wheelswitch. All r/min above this valueup to the “Tach IND 2nd” setting2CR-9-E0_1.book 25 ページ ２０１５年１月５日 月曜日 午前１１時５４分
