INSTRUMENT AND CONTROL FUNCTIONS4-47123456789101112With the engine turned off:1. Move the sidestand down.2. Make sure that the engine stop switch is set to “3. Turn the key on.4. Shift the transmission into the neutral position.5. Push the start switch.Does the engine start?With the engine still running:6. Move the sidestand up.7. Keep the clutch lever pulled.8. Shift the transmission into gear.9. Move the sidestand down.Does the engine stall?After the engine has stalled:10. Move the sidestand up.11. Keep the clutch lever pulled.12. Push the start switch.Does the engine start?The system is OK. The motorcycle can be ridden.The neutral switch may not be working correctly.The motorcycle should not be ridden untilchecked by a Yamaha dealer.The sidestand switch may not be working correctly.The motorcycle should not be ridden untilchecked by a Yamaha dealer.The clutch switch may not be working correctly.The motorcycle should not be ridden untilchecked by a Yamaha dealer.YES NOYES NOYES NOIf a malfunction is noted, have a Yamahadealer check the system before riding.WARNING”.2CR-9-E0_1.book 47 ページ ２０１５年１月５日 月曜日 午前１１時５４分
