INSTRUMENT AND CONTROL FUNCTIONS4-30123456789101112EAU67010Shift pedalThe shift pedal is located on the leftside of the motorcycle and is used incombination with the clutch lever whenshifting the gears of the 6-speed con-stant-mesh transmission.When the quick-shift system is turnedon, the shift switch senses shift pedalmovement and allows for upshiftingwithout operating the clutch lever. SeeQSS on page 4-17 for more informa-tion.EAU67033Brake leverThe brake lever is located on the rightside of the handlebar. To apply the frontbrake, pull the lever toward the throttlegrip.This model is equipped with a variableunified brake system (UBS).When pulling the brake lever, the frontbrake and a portion of the rear brakeare applied. For full braking perfor-mance, apply both the brake lever andbrake pedal simultaneously.TIPSee Brake system for more informa-tion on how the UBS and ABS systemswork.The brake lever is equipped with abrake lever position adjusting dial. Toadjust the distance between the brakelever and the throttle grip, turn the ad-justing dial while holding the leverpushed away from the throttle grip.Make sure that the appropriate settingon the adjusting dial is aligned with the“ ” mark on the brake lever.1. Shift pedal2. Shift switch121. “ ” mark2. Brake lever position adjusting dial3. Brake lever4. Distance between brake lever andhandlebar grip12342CR-9-E0_1.book 30 ページ ２０１５年１月５日 月曜日 午前１１時５４分
